Rotary Kiln

    Rotary Kilns are commonly used for heat processing of minerals and aggregates such as lime, cement, and iron ore. To achieve consistent quality results, it is important to maintain a uniform product temperature at the kiln entry, mid zone, and discharge. In most rotary kilns, the challenge with temperature process control is that the temperature sensor must view through flames or heavy smoke and dust. Consequently, when selecting a sensor, the design, wavelength, and alignment are all important considerations.
    Our high-performance dual-wavelength sensors offer unequalled performance for accurate and repeatable measurements on kiln applications. These sensors can operate properly when the target energy signal is diluted over 99% by such things as dust and smoke. To effectively measure targets through flames, the 1400 and 4400 Series are recommended. These single-wavelength sensors utilize a very narrow band 3.8 micron filter that provides unequalled performance with measurements through flames.
    Common process measurements include:
    Hot Clinker Detection
    Product Discharge Temperature
    Product Entry Temperature
    Mid-Zone Temperature
    Combustion Gas Temperature
    Kiln Shell Hot Spot Detection

Main Technical Parameters of Rotary Kiln

Model	Max feed size(mm)	Power(Kw)	Impeller speed(r/min)	Output(t/h)	Overall dimension(mm)	Weight(not include motor)(Kg)
PCL-600	35	22-55	2000/3000	12-30	2500×Ф1600×2260	5600
PCL-750	45	45-90	1500/2500	25-55	2780×Ф1800×2700	7300
PCL-900	50	90-180	1200/2000	55-100	3900×Ф2160×2770	12100
PCL-1050	60	150-264	1000/1700	100-160	4660×Ф2450×3660	16900
PCL-1250	60	264-440	850/1450	160-300	5600×Ф2950×4000	22000
PCL-1350	60	320-440	800-1193	200-360	5340×Ф2940×3650	26000